IMO MEPC.107(49) 15 PPM Certified IACS UR M10 Crankcase OMD Standards Class-Traceable Multimeter & Calibrators 24/7 Attendance Across Major UAE Ports

Marine Automation Service Provider — Attendance & Calibration (BLUF)

Seanav Marine delivers 24/7 certified marine automation, instrumentation calibration, and control engineering across UAE commercial ports (Jebel Ali, Khalifa Port, Port of Fujairah, Mina Rashid, Mina Zayed, Khor Fakkan). Our instrumentation engineers attend at berth and outer anchorage with Class-traceable calibrators for 15 PPM bilge alarms (Deckma, Rivertrace), Oil Mist Detectors (Daihatsu, Schaller, Graviner), Boiler burner management, Main Engine pneumatic maneuvering, PMS power management, and tank gauging systems with a guaranteed 2–4 hour response SLA.

Sectors: All Services (57) Marine NAVCOM (24) Marine Automation Systems (9) Marine Safety (LSA & FFA) (10) Marine Engines & Propulsion (5) Charts & Nautical Publications (4) Maritime Airtime & Satcom (5)

Cargo, HVAC and Process Automation Services

For engine-room alarms and sensor faults, start with alarm monitoring and troubleshooting. For generator synchronisation or load sharing, use power management system service.

Cargo and Tank Monitoring Systems

Send enquiries for radar tank gauging, electro-pneumatic level transmitters, cargo temperature sensors, manifold pressure transmitters and electronic overfill alarms. For valve remote control consoles, hydraulic power units and ballast automation, see our valve remote control and tank level gauging service.

Marine HVAC and Refrigeration Automation

We attend marine chiller plants, provision refrigeration monitoring units and air handling climate controllers across Indian ports. Tell us your compressor make, expansion valve symptoms, controller error codes or defrost sequence faults for port attendance or spares dispatch.

Field Instrumentation and Sensor Calibration

Request onboard calibration and loop testing for 4–20 mA pressure transmitters, PT100 RTDs, thermocouples, I/P converters and solenoid valve manifolds. For custom controller reprogramming, HMI screen replacement or code backups, see marine PLC and HMI programming.

Email service@seanav.org with vessel name, port of call, ETA/ETD, equipment make/model and fault description.

Automation Systems Equipment and Supply

Ask about equipment and spares supply, maintenance, repair, servicing and overhaul. Send the make, model and work required so we can confirm scope and availability.

Engine Room Automation

Main Engine Remote Control System
Engine Telegraph System
Engine Safety Shutdown System
Governor Control System
Emergency Stop System
Throttle Control Unit (for CPP/FPP)
Engine Alarm Monitoring System (AMS / ERAMS)
Pump Control System (Auto / Manual / Remote)
Boiler Automation System
Auxiliary Engine Control Panel

Ventilation, Steering & Utility Control

Steering Gear Control System
Ballast Control System
Valve Remote Control System (VRC / VPCS)
HVAC Automation / Control Unit
Compressor Automation Panel (Air Systems)
Hydraulic Power Unit (HPU) Control System

Electrical & Safety Automation

Generator Auto Start / Synchronization System
Emergency Generator Start Panel
Battery Monitoring System
Fire Detection & Alarm System (FDAS)
Engine Room Flooding Detection System
Water Ingress Alarm System
Bilge Tank Monitoring System

Monitoring & Control Systems

Integrated Automation System (IAS)
Power Management System (PMS)
Tank Level Monitoring System
Temperature Monitoring System
Pressure Monitoring System
Engine Performance Monitoring System
Oil Mist Detection System (OMD)
Shaft Power / Torque Meter
Fuel Viscosity / Flow Monitoring System
Bunker Monitoring System

Pollution Control

OWS – Oily Water Separator (15 ppm Bilge Alarm Monitor )
ODME – Oil Discharge Monitoring Equipment
Bilge Tank Level Monitoring System
Sludge Tank Monitoring System
Overboard Discharge Valve Monitoring / Control System

Other Automation Devices & Units

Programmable Logic Controllers (PLC)
Human Machine Interface (HMI) Touch Panels
SCADA Systems (Supervisory Control and Data Acquisition)
Control Relays & Contactors
Data Logger / Trend Recorder
Remote I/O Modules

Detailed service enquiry checklist

Find the equipment or work you need and include it in your email. Seanav confirms availability, technical scope and any partner or approval requirements for each job.

Main engine automation and control services

Main engine automation system inspection
Main engine remote control system servicing
Main engine remote control system troubleshooting
Main engine electronic control system maintenance
Main engine control unit inspection
Main engine control panel servicing
Main engine control console maintenance
Main engine local control system servicing
Main engine bridge control system servicing
Main engine engine-room control system servicing
Main engine manoeuvring control system inspection
Main engine start and stop control servicing
Main engine speed control system servicing
Main engine load control system servicing
Main engine RPM control system calibration
Main engine reversing control system servicing
Main engine slow turning system inspection
Main engine automatic start system servicing
Main engine automatic stop system servicing
Main engine shutdown system testing
Main engine emergency stop system testing
Main engine safety interlock servicing
Main engine control logic inspection
Main engine control circuit troubleshooting
Main engine actuator control servicing
Main engine fuel control automation servicing
Main engine electronic fuel injection control inspection
Main engine exhaust valve control system servicing
Main engine cylinder lubrication control servicing
Main engine turbocharger control system inspection
Main engine auxiliary blower automation servicing
Main engine turning gear interlock servicing
Main engine alarm and monitoring integration
Main engine control system software configuration
Main engine automation system upgrade

Main engine monitoring and protection

Main engine performance monitoring system servicing
Main engine pressure monitoring system calibration
Main engine temperature monitoring system calibration
Main engine lubrication oil monitoring system servicing
Main engine cooling water monitoring system servicing
Main engine fuel pressure monitoring system servicing
Main engine exhaust temperature monitoring system servicing
Main engine bearing temperature monitoring system servicing
Main engine crankcase oil mist detector servicing
Main engine overspeed protection system testing
Main engine low lubrication oil pressure protection testing
Main engine high cooling water temperature protection testing
Main engine high exhaust temperature alarm testing
Main engine low fuel pressure alarm testing
Main engine high crankcase pressure alarm testing
Main engine thrust bearing monitoring system servicing
Main engine vibration monitoring system integration
Main engine cylinder pressure monitoring system servicing
Main engine engine-load monitoring system calibration
Main engine condition monitoring system servicing
Main engine alarm set-point verification
Main engine sensor fault diagnosis
Main engine monitoring display servicing
Main engine data acquisition system servicing
Main engine protection system functional testing

Auxiliary engine and diesel generator automation

Auxiliary engine automation system servicing
Diesel generator remote control system servicing
Diesel generator automatic start system servicing
Diesel generator automatic stop system servicing
Diesel generator speed control system servicing
Diesel generator load control system servicing
Diesel generator electronic governor servicing
Diesel generator engine control unit servicing
Diesel generator control panel troubleshooting
Diesel generator local control panel servicing
Diesel generator remote control panel servicing
Diesel generator safety shutdown system testing
Diesel generator overspeed protection testing
Diesel generator low oil pressure protection testing
Diesel generator high temperature protection testing
Diesel generator engine monitoring system servicing
Diesel generator fuel control automation servicing
Diesel generator cooling system automation servicing
Diesel generator starting air control servicing
Diesel generator battery starting control servicing
Diesel generator alarm monitoring system servicing
Diesel generator load-sharing control servicing
Diesel generator synchronising control servicing
Diesel generator automatic changeover system servicing
Diesel generator power management integration
Diesel generator running-hour monitoring servicing
Diesel generator fuel consumption monitoring
Diesel generator performance monitoring system servicing
Diesel generator ECU fault diagnosis
Auxiliary engine automation system upgrade

Power management and generator synchronisation

Service details for Power management and generator synchronisation

Power management system (PMS) inspection
Power management system troubleshooting
Power management system maintenance
Power management system commissioning
Power management system configuration
Power management system software upgrade
Generator automatic synchronising system servicing
Generator synchronising panel maintenance
Generator load-sharing system servicing
Generator load-dependent start and stop system servicing
Generator automatic load control servicing
Generator frequency control system servicing
Generator voltage control system servicing
Generator reactive power sharing system servicing
Generator active power sharing system servicing
Generator priority selection system configuration
Generator blackout prevention system servicing
Generator blackout recovery system servicing
Automatic generator start sequence testing
Automatic generator shutdown sequence testing
Busbar voltage monitoring system servicing
Busbar frequency monitoring system servicing
Busbar protection system testing
Generator breaker control system servicing
Shore power and generator interlocking system servicing
Generator load-shedding system servicing
Automatic load restoration system servicing
Non-essential load control system servicing
Power distribution automation integration
Integrated power management system upgrade

Propulsion control and manoeuvring automation

Propulsion control system inspection
Propulsion control system troubleshooting
Propulsion remote control system servicing
Propulsion local control system servicing
Bridge propulsion control system servicing
Engine-room propulsion control system servicing
Propulsion control lever servicing
Propulsion joystick control system servicing
Propulsion speed control system calibration
Propulsion direction control system servicing
Propulsion pitch control system servicing
Controllable pitch propeller (CPP) automation servicing
Fixed pitch propeller propulsion control servicing
Shaft speed monitoring system servicing
Shaft power monitoring system servicing
Propeller pitch feedback system calibration
Propulsion hydraulic control system servicing
Propulsion electro-hydraulic control servicing
Propulsion electronic governor integration
Propulsion control system alarm servicing
Propulsion control interlock testing
Propulsion emergency control system servicing
Propulsion transfer control system servicing
Propulsion control system integration
Propulsion automation software configuration
Propulsion control panel refurbishment
Propulsion control system retrofit
Propulsion control system commissioning
Propulsion manoeuvring system testing
Integrated propulsion automation upgrade

Thruster, steering and manoeuvring automation

Bow thruster control system servicing
Stern thruster control system servicing
Tunnel thruster automation servicing
Azimuth thruster control system servicing
Retractable thruster control system servicing
Thruster remote control system servicing
Thruster joystick control system servicing
Thruster speed control system calibration
Thruster direction control system servicing
Thruster pitch control system servicing
Thruster hydraulic control system servicing
Thruster motor control system servicing
Thruster overload protection testing
Thruster temperature monitoring servicing
Thruster alarm system troubleshooting
Thruster feedback sensor calibration
Thruster bridge control panel servicing
Thruster control lever servicing
Thruster interlock system testing
Thruster automation commissioning
Steering gear control system servicing
Steering gear remote control system servicing
Steering gear bridge control system servicing
Steering gear follow-up control servicing
Steering gear non-follow-up control servicing
Steering gear autopilot interface servicing
Steering angle feedback system calibration
Rudder angle indicator calibration
Rudder control system troubleshooting
Steering gear alarm and monitoring servicing

Boiler and burner automation

Service details for Boiler and burner automation

Marine boiler automation system servicing
Auxiliary boiler control system servicing
Exhaust gas boiler automation servicing
Composite boiler automation servicing
Boiler burner management system servicing
Boiler combustion control system servicing
Boiler fuel oil control system servicing
Boiler fuel pressure monitoring calibration
Boiler combustion air control servicing
Boiler flame monitoring system servicing
Boiler flame scanner inspection
Boiler ignition sequence control servicing
Boiler automatic firing system servicing
Boiler burner safety interlock testing
Boiler low water level alarm testing
Boiler high steam pressure alarm testing
Boiler water level control system calibration
Boiler feed water control system servicing
Boiler steam pressure control servicing
Boiler automatic blowdown control servicing
Boiler combustion air fan control servicing
Boiler burner actuator servicing
Boiler oxygen trim control servicing
Boiler combustion efficiency monitoring
Boiler alarm and shutdown system testing
Boiler control panel troubleshooting
Boiler PLC control system servicing
Boiler burner sequence controller servicing
Boiler automation commissioning
Boiler automation retrofit

Pump, valve and machinery automation

Marine pump automation system servicing
Ballast pump control system servicing
Bilge pump automation servicing
Fire pump automation servicing
General service pump control servicing
Fuel oil transfer pump automation servicing
Lubricating oil pump control servicing
Cooling water pump automation servicing
Sea water pump control servicing
Fresh water pump automation servicing
Hydraulic pump control system servicing
Cargo pump automation servicing
Tank stripping pump automation servicing
Emergency pump control system servicing
Automatic pump start and stop control servicing
Pump sequencing control system servicing
Pump pressure control system calibration
Pump flow control system calibration
Pump motor protection system testing
Pump dry-running protection servicing
Remote valve control system servicing
Pneumatic valve actuator servicing
Electric valve actuator servicing
Hydraulic valve actuator servicing
Control valve positioner calibration
Automatic valve sequencing system servicing
Tank valve remote control system servicing
Ballast valve automation servicing
Bilge valve automation servicing
Machinery valve control system commissioning

Ballast water and tank automation

Ballast water management system automation servicing
Ballast water treatment control system servicing
Ballast water system PLC servicing
Ballast water control panel troubleshooting
Ballast water flow monitoring calibration
Ballast water UV system automation servicing
Ballast water electrochlorination control servicing
Ballast water TRO monitoring integration
Ballast water system alarm testing
Ballast water system commissioning
Ballast pump remote control servicing
Ballast tank level monitoring calibration
Ballast tank high-level alarm testing
Ballast tank low-level alarm testing
Ballast tank level sensor servicing
Ballast tank pressure monitoring servicing
Ballast tank valve automation servicing
Ballast tank filling sequence control servicing
Ballast tank emptying sequence control servicing
Ballast system automation upgrade

Cargo control and monitoring automation

Cargo control system inspection
Cargo control system troubleshooting
Cargo control room automation servicing
Cargo control console maintenance
Cargo monitoring system servicing
Cargo tank level monitoring calibration
Cargo tank pressure monitoring calibration
Cargo tank temperature monitoring calibration
Cargo tank high-level alarm testing
Cargo tank overfill protection system testing
Cargo pump remote control servicing
Cargo valve remote control servicing
Cargo valve position feedback calibration
Cargo line pressure monitoring servicing
Cargo flow monitoring system calibration
Cargo loading sequence automation servicing
Cargo discharge sequence automation servicing
Cargo tank stripping automation servicing
Cargo tank inert gas monitoring integration
Cargo control PLC servicing
Cargo automation HMI servicing
Cargo system data acquisition servicing
Cargo automation alarm management
Cargo system interlock testing
Cargo automation commissioning
Cargo automation retrofit
Cargo pump emergency shutdown integration
Cargo control system software configuration
Cargo instrumentation calibration
Integrated cargo automation system upgrade

Tank gauging and level measurement

Marine tank gauging system inspection
Tank gauging system troubleshooting
Automatic tank gauging system servicing
Remote tank gauging system servicing
Radar tank level transmitter calibration
Ultrasonic tank level transmitter calibration
Hydrostatic tank level transmitter calibration
Float-type level sensor servicing
Tank pressure transmitter calibration
Tank temperature transmitter calibration
Tank high-level alarm testing
Tank overfill alarm testing
Tank low-level alarm testing
Tank level switch inspection
Tank level indicator servicing
Cargo tank level monitoring system servicing
Fuel oil tank level monitoring servicing
Diesel oil tank level monitoring servicing
Lubricating oil tank level monitoring servicing
Fresh water tank level monitoring servicing
Ballast tank level monitoring servicing
Bilge tank level monitoring servicing
Sludge tank level monitoring servicing
Waste oil tank level monitoring servicing
Tank gauging display and repeater servicing
Tank gauging data acquisition integration
Tank gauging alarm system testing
Tank gauging software configuration
Tank gauging system commissioning
Tank gauging system upgrade

HVAC and refrigeration automation

Marine HVAC automation system servicing
Air conditioning control system servicing
Central air conditioning automation servicing
Chiller control system servicing
Refrigeration plant automation servicing
Provision refrigeration control system servicing
Cold room temperature control servicing
Freezer room temperature control servicing
Compressor control system servicing
Refrigeration compressor sequencing servicing
Refrigerant pressure monitoring calibration
Evaporator temperature control calibration
Condenser temperature monitoring servicing
Cooling water control automation servicing
HVAC fan speed control servicing
Ventilation fan automation servicing
Air handling unit (AHU) control servicing
Variable air volume control servicing
Variable frequency drive HVAC control servicing
HVAC damper actuator servicing
Cabin temperature control system servicing
Accommodation climate control servicing
Engine-room ventilation automation servicing
HVAC alarm monitoring system servicing
HVAC PLC and controller servicing
HVAC control panel troubleshooting
HVAC sensor calibration
Refrigeration alarm and shutdown testing
HVAC automation commissioning
HVAC control system retrofit

Alarm monitoring and control systems

Service details for Alarm monitoring and control systems

Marine alarm monitoring system inspection
Alarm monitoring system troubleshooting
Centralised alarm monitoring system servicing
Machinery alarm monitoring system servicing
Engine-room alarm monitoring servicing
Bridge alarm monitoring system servicing
Unattended machinery space alarm servicing
Engineers' alarm system servicing
Watch call system servicing
Alarm annunciator panel servicing
Alarm monitoring display servicing
Alarm repeater panel servicing
Alarm acknowledgement system servicing
Alarm prioritisation configuration
Alarm set-point calibration
Alarm sequence testing
Alarm relay module servicing
Alarm input and output circuit testing
Alarm history and event logging servicing
Alarm data acquisition integration
Alarm system sensor fault diagnosis
Alarm communication fault troubleshooting
Alarm network troubleshooting
Alarm system software configuration
Alarm system upgrade

Integrated automation and monitoring systems

Integrated automation system (IAS) inspection
Integrated automation system troubleshooting
Integrated automation system maintenance
Integrated automation system commissioning
Integrated automation system software configuration
Integrated automation system upgrade
Integrated bridge and engine-room automation integration
Machinery control and monitoring integration
Main engine and auxiliary engine integration
Generator and power management integration
Propulsion and thruster integration
Steering and navigation system integration
Alarm and monitoring system integration
Cargo and ballast system integration
Tank gauging and monitoring integration
HVAC and machinery monitoring integration
Central monitoring and control system servicing
Distributed control system (DCS) servicing
Remote machinery monitoring integration
Vessel-wide automation network servicing
Automation system data acquisition integration
Automation system interface configuration
Integrated control console servicing
Integrated automation system diagnostics
Integrated automation system retrofit

PLC, HMI and control panel services

Service details for PLC, HMI and control panel services

Marine PLC system inspection
Marine PLC troubleshooting
Marine PLC maintenance
Marine PLC programming
Marine PLC software modification
Marine PLC hardware replacement
Marine PLC input/output module servicing
Marine PLC communication module servicing
Marine PLC power supply servicing
Marine PLC network troubleshooting
Marine PLC configuration backup
Marine PLC programme recovery
Marine PLC system upgrade
Marine HMI inspection
Marine HMI troubleshooting
Marine HMI display replacement
Marine HMI touchscreen servicing
Marine HMI software configuration
Marine HMI graphics development
Marine HMI alarm screen configuration
Marine SCADA system inspection
Marine SCADA troubleshooting
Marine SCADA configuration
Marine SCADA software upgrade
Marine control panel inspection
Marine control panel repair
Marine control panel refurbishment
Marine control panel modification
Marine control panel fabrication
PLC and HMI system commissioning

Sensors, transmitters and instrumentation

Marine instrumentation inspection
Marine instrumentation troubleshooting
Pressure sensor calibration
Pressure transmitter calibration
Differential pressure transmitter calibration
Temperature sensor calibration
Temperature transmitter calibration
Resistance temperature detector (RTD) servicing
Thermocouple inspection and calibration
Flow sensor calibration
Flow transmitter calibration
Magnetic flowmeter servicing
Ultrasonic flowmeter servicing
Mass flowmeter servicing
Level sensor calibration
Level transmitter calibration
Radar level transmitter servicing
Ultrasonic level transmitter servicing
Vibration sensor calibration
Speed sensor calibration
RPM sensor servicing
Position sensor calibration
Proximity sensor servicing
Limit switch inspection
Pressure switch calibration
Temperature switch calibration
Flow switch inspection
Level switch inspection
Load cell calibration
Instrument loop checking

Engine-room monitoring and auxiliary machinery automation

Engine-room monitoring system servicing
Engine-room machinery control system servicing
Engine-room data monitoring system servicing
Engine-room remote monitoring integration
Engine-room equipment status monitoring
Air compressor automation servicing
Starting air compressor control servicing
Service air compressor control servicing
Fresh water generator automation servicing
Reverse osmosis plant automation servicing
Sewage treatment plant automation servicing
Oily water separator automation servicing
Oil content monitor integration
Incinerator automation servicing
Waste heat recovery automation servicing
Exhaust gas cleaning system automation servicing
Scrubber control system servicing
Selective catalytic reduction (SCR) control system servicing
Urea dosing automation servicing
Fuel conditioning system automation servicing
Fuel oil purifier control system servicing
Lubricating oil purifier control system servicing
Separator automation troubleshooting
Hydraulic power pack automation servicing
Compressed air system monitoring servicing
Cooling water system monitoring servicing
Fresh water system monitoring servicing
Machinery running-hour monitoring
Auxiliary machinery alarm integration
Engine-room automation upgrade

Electrical automation and motor control

Marine electrical automation inspection
Marine electrical control system troubleshooting
Motor control centre (MCC) servicing
Motor control panel servicing
Motor starter panel maintenance
Direct-on-line starter servicing
Star-delta starter servicing
Soft starter servicing
Variable frequency drive (VFD) servicing
Variable speed drive (VSD) troubleshooting
Electric motor speed control calibration
Electric motor protection relay testing
Motor overload protection testing
Motor temperature monitoring servicing
Motor current monitoring calibration
Motor voltage monitoring calibration
Automatic motor control system servicing
Motor interlock system testing
Automatic motor changeover system servicing
Electric actuator control servicing
Electrical load monitoring system servicing
Electrical power monitoring system servicing
Energy management control system servicing
Automatic transfer switch (ATS) servicing
Electrical distribution automation integration
Circuit breaker remote control servicing
Switchboard automation servicing
Generator breaker control servicing
Electrical protection system testing
Electrical automation system commissioning

Hydraulic and pneumatic automation

Marine hydraulic automation inspection
Hydraulic control system troubleshooting
Hydraulic power unit automation servicing
Hydraulic pump control servicing
Hydraulic pressure control calibration
Hydraulic temperature monitoring servicing
Hydraulic oil level monitoring servicing
Hydraulic valve control system servicing
Hydraulic proportional valve calibration
Hydraulic servo valve inspection
Hydraulic actuator control servicing
Electro-hydraulic control system servicing
Hydraulic remote control system servicing
Hydraulic steering control system servicing
Hydraulic thruster control system servicing
Hydraulic winch control system servicing
Hydraulic crane control system servicing
Hydraulic hatch cover control servicing
Hydraulic mooring equipment control servicing
Hydraulic automation commissioning
Marine pneumatic control system inspection
Pneumatic control system troubleshooting
Pneumatic actuator servicing
Pneumatic valve control system servicing
Pneumatic pressure regulator calibration
Pneumatic positioner calibration
Pneumatic solenoid valve servicing
Pneumatic instrument air system servicing
Pneumatic control panel servicing
Hydraulic and pneumatic automation retrofit

Navigation and bridge automation integration

Bridge control console automation integration
Integrated bridge system (IBS) interface servicing
Integrated bridge automation troubleshooting
Autopilot and steering control integration
Gyrocompass and steering control interface servicing
ECDIS and bridge system data integration
Radar and bridge automation interface servicing
AIS and bridge system interface servicing
Speed log and automation interface servicing
Echo sounder and automation interface servicing
GPS and automation data interface servicing
Voyage data recorder (VDR) interface inspection
Bridge alarm management system servicing
Bridge control panel refurbishment
Bridge joystick control integration
Dynamic positioning interface servicing
Navigation sensor data distribution servicing
NMEA 0183 interface troubleshooting
NMEA 2000 interface troubleshooting
IEC 61162 network integration
Bridge network configuration
Bridge system data repeater servicing
Bridge automation software configuration
Bridge automation commissioning
Integrated bridge system upgrade

Dynamic positioning and offshore automation

Dynamic positioning (DP) control system inspection
DP control system troubleshooting
DP control console servicing
DP joystick control system servicing
DP thruster control integration
DP propulsion control integration
DP power management integration
DP reference system interface servicing
DP sensor interface troubleshooting
DP alarm monitoring system servicing
DP system data acquisition servicing
DP control network troubleshooting
DP system software configuration
DP system upgrade support
DP system commissioning support
Offshore platform automation inspection
Offshore platform control system servicing
Offshore machinery automation servicing
Offshore process control system servicing
Offshore control room console servicing
Offshore PLC and SCADA system servicing
Offshore alarm and monitoring integration
Offshore equipment remote monitoring
Offshore automation network troubleshooting
Offshore automation system retrofit

Cargo handling and specialised vessel automation

Tanker cargo automation servicing
Chemical tanker cargo automation servicing
LNG vessel automation servicing
LPG vessel automation servicing
Gas carrier cargo control system servicing
Oil tanker cargo monitoring system servicing
Chemical cargo monitoring system servicing
LNG cargo monitoring system servicing
LPG cargo monitoring system servicing
Cargo compressor automation servicing
Cargo refrigeration automation servicing
Cargo reliquefaction plant automation servicing
Cargo heater control system servicing
Cargo vapour handling automation servicing
Inert gas system automation servicing
Nitrogen generation system automation servicing
Gas detection and cargo monitoring integration
Cargo tank pressure control automation
Cargo tank temperature control automation
Cargo emergency shutdown system servicing
Ro-Ro vessel ramp control automation
Hatch cover control automation servicing
Container vessel reefer monitoring integration
Reefer container monitoring system servicing
Bulk carrier cargo hold monitoring integration
Dredger automation system servicing
Fishing vessel automation system servicing
Passenger vessel machinery automation servicing
Offshore support vessel automation servicing
Specialised vessel automation upgrade

Safety, shutdown and protection automation

Emergency shutdown system (ESD) inspection
Emergency shutdown system troubleshooting
Emergency shutdown panel servicing
Emergency shutdown logic testing
Emergency shutdown actuator testing
Machinery shutdown system servicing
Main engine shutdown system testing
Auxiliary engine shutdown system testing
Boiler shutdown system testing
Fuel supply shutdown system servicing
Quick closing valve control system servicing
Remote fuel oil shut-off system servicing
Ventilation shutdown control system servicing
Fire damper remote control system servicing
Watertight door control system servicing
Watertight door alarm and interlock testing
Machinery safety interlock servicing
Safety PLC system troubleshooting
Safety relay system testing
Redundant control system inspection
Fail-safe control logic verification
Machinery overspeed protection testing
High-pressure protection system testing
Low-pressure protection system testing
High-temperature protection system testing
Low-level protection system testing
Emergency stop circuit testing
Safety alarm integration
Protection system commissioning
Safety automation system upgrade

Communication networks and industrial data systems

Marine automation network inspection
Marine automation network troubleshooting
Industrial Ethernet network servicing
Ethernet switch configuration
Managed network switch servicing
Fibre optic automation network inspection
Fibre optic cable testing
Serial communication network troubleshooting
Modbus RTU communication integration
Modbus TCP communication integration
Profibus network troubleshooting
Profinet network troubleshooting
CAN bus communication troubleshooting
Controller Area Network interface servicing
RS-232 communication troubleshooting
RS-422 communication troubleshooting
RS-485 communication troubleshooting
NMEA data network servicing
OPC UA communication integration
Industrial protocol gateway configuration
Automation system data logging integration
Remote I/O network servicing
Redundant automation network configuration
Network communication fault diagnosis
Automation network segmentation
Industrial network performance monitoring
Automation system time synchronisation
Control system data backup and recovery
Remote automation monitoring connectivity
Marine automation network upgrade

Automation software, programming and engineering

Marine automation software inspection
Marine automation software troubleshooting
PLC programme development
PLC programme modification
PLC programme debugging
PLC programme optimisation
HMI application development
HMI screen redesign
SCADA application development
SCADA screen configuration
Control logic development
Control sequence programming
Alarm logic programming
Interlock logic programming
PID controller configuration
PID loop tuning
Closed-loop control system optimisation
Open-loop control system configuration
Motion control programming
Servo control system configuration
Data acquisition software development
Machinery monitoring software configuration
Automation system parameter configuration
Automation system software backup
Automation programme recovery
Software compatibility assessment
Automation firmware upgrade
Control system version management
Automation system documentation
Automation engineering and design support

Automation repair, maintenance and troubleshooting

Marine automation fault diagnosis
Marine automation emergency troubleshooting
Marine automation breakdown repair
Marine automation preventive maintenance
Marine automation corrective maintenance
Marine automation condition assessment
Marine automation system health checks
Control panel component replacement
PLC module replacement
HMI replacement
Industrial controller replacement
Automation power supply replacement
Relay and contactor replacement
Signal isolator replacement
Interface module replacement
Control circuit repair
Instrument wiring repair
Automation cable testing
Control cabinet inspection
Control cabinet cooling system servicing
Control cabinet ventilation servicing
Control system grounding inspection
Automation system insulation testing
Control system communication fault repair
Automation system intermittent fault diagnosis
Automation system configuration recovery
Automation system performance testing
Automation system functional testing
Automation system reliability assessment
Automation system repair and restoration

Condition monitoring and predictive maintenance

Machinery condition monitoring system servicing
Online vibration monitoring system servicing
Vibration analysis system integration
Bearing condition monitoring system servicing
Shaft vibration monitoring system servicing
Shaft alignment monitoring integration
Machinery temperature trend monitoring
Lubricating oil condition monitoring integration
Oil debris monitoring system servicing
Engine performance trend monitoring
Generator performance trend monitoring
Pump condition monitoring integration
Compressor condition monitoring integration
Gearbox condition monitoring integration
Propulsion machinery condition monitoring
Thermal monitoring system integration
Acoustic monitoring system integration
Machinery operating data analysis
Equipment health monitoring dashboard configuration
Predictive maintenance software integration
Machinery performance analytics
Abnormal operating condition detection
Machinery fault trend analysis
Remote condition monitoring configuration
Condition monitoring system commissioning

Automation upgrades, retrofits and modernisation

Marine automation system modernisation
Legacy automation system assessment
Obsolete PLC replacement
Legacy control system replacement
Automation panel replacement
Engine control system retrofit
Generator automation retrofit
Power management system retrofit
Propulsion control system retrofit
Thruster control system retrofit
Steering control system retrofit
Boiler automation retrofit
Pump control system retrofit
Cargo automation retrofit
Ballast automation retrofit
Tank gauging system retrofit
HVAC automation retrofit
Alarm monitoring system retrofit
Integrated automation system retrofit
PLC and HMI modernisation
Control system hardware upgrade
Control system software upgrade
Automation network modernisation
Remote monitoring system installation
Machinery data acquisition system upgrade

Testing, commissioning and technical support

Marine automation system commissioning
Marine automation system testing
Factory acceptance test (FAT) support
Site acceptance test (SAT) support
Harbour acceptance test (HAT) support
Sea trial automation support
Automation system functional testing
Control system loop checking
PLC input/output testing
Control panel functional testing
Alarm and shutdown testing
Emergency stop functional testing
Generator synchronisation testing
Power management system testing
Propulsion control testing
Thruster control testing
Steering control testing
Boiler control testing
Pump automation testing
Valve remote control testing
Tank gauging system testing
Cargo control system testing
Ballast control system testing
Machinery monitoring system testing
Automation system performance verification
Automation system calibration support
Automation system inspection reports
Automation system maintenance reports
Automation technical documentation
Automation crew familiarisation and training

Remote monitoring, digitalisation and specialised automation

Remote vessel machinery monitoring
Remote engine performance monitoring
Remote generator monitoring
Remote power management monitoring
Remote propulsion monitoring
Remote alarm monitoring
Remote equipment diagnostics
Remote automation troubleshooting
Ship-to-shore machinery data integration
Fleet machinery performance monitoring
Fleet automation monitoring dashboard
Vessel operational data acquisition
Vessel machinery data historian integration
Shipboard IoT monitoring integration
Industrial IoT sensor integration
Smart sensor installation and integration
Cloud-based machinery monitoring integration
Vessel energy monitoring integration
Fuel consumption monitoring and analytics
Machinery efficiency monitoring
Automated performance reporting
Digital machinery logbook integration
Remote equipment status monitoring
Automated maintenance alert integration
Predictive maintenance platform integration
Vessel digitalisation engineering support
Smart vessel automation integration
Cybersecurity assessment of operational technology (OT)
Industrial control system cybersecurity support
Automation system remote access security configuration

Additional specialised automation opportunities

Marine sewage treatment automation servicing
Grey water treatment automation servicing
Fresh water generation control system servicing
Reverse osmosis plant control panel servicing
UV sterilisation system automation servicing
Chlorination dosing automation servicing
Chemical dosing control system servicing
Fuel treatment plant automation servicing
Fuel viscosity control system servicing
Fuel temperature control system servicing
Fuel changeover automation servicing
Fuel consumption measurement system integration
Lubricating oil temperature control servicing
Lubricating oil pressure control servicing
Oil mist detection integration
Bilge water monitoring system integration
Oily water separator control panel servicing
Incinerator burner automation servicing
Waste management system automation integration
Garbage handling system automation servicing
Marine crane control system servicing
Deck crane automation servicing
Provision crane control system servicing
Anchor windlass control system servicing
Mooring winch automation servicing
Towing winch control system servicing
Tension control system servicing
Capstan control system servicing
Hydraulic hatch cover control system servicing
Deck machinery remote control integration
Elevator and lift control system servicing
Gangway control system servicing
Stabiliser control system servicing
Fin stabiliser automation servicing
Active ride control system servicing
Waterjet propulsion control system servicing
Hybrid propulsion control integration
Battery energy storage system (BESS) monitoring integration
Energy management system (EMS) integration
Shore connection automation integration

Additional instrumentation, control and monitoring opportunities

Gas pressure monitoring system calibration
Oxygen monitoring system servicing
Carbon dioxide monitoring system servicing
Hydrogen sulphide monitoring system servicing
Hydrocarbon gas monitoring integration
Methane gas monitoring system servicing
Toxic gas detection system integration
Portable gas detector calibration support
Fixed gas detector calibration support
Gas detector alarm integration
Fire detection system automation integration
Fire alarm control panel interface servicing
Smoke detection system interface testing
Heat detection system interface testing
Flame detection system interface testing
Water leakage detection system integration
Flooding detection system integration
Bilge high-level alarm integration
Engine-room water ingress monitoring
Machinery space fire and safety monitoring
Tank pressure vacuum monitoring
Pipeline pressure monitoring integration
Pipeline flow monitoring integration
Fuel leak detection monitoring
Hydraulic leak detection monitoring
Equipment position feedback integration
Remote equipment status indication
Digital instrument display servicing
Instrument signal conversion and isolation
Instrumentation system integration

Specialist control systems and equipment integration

Electronic governor system servicing
Engine control unit (ECU) diagnostics
Engine management system servicing
Engine protection unit servicing
Generator automatic voltage regulator (AVR) servicing
Generator excitation control integration
Generator protection relay configuration
Motor protection relay configuration
Electronic speed controller servicing
Servo drive system servicing
Stepper motor control integration
Electromagnetic clutch control servicing
Brake control system automation servicing
Remote control transmitter and receiver servicing
Wireless machinery control integration
Radio remote control system servicing
Safety instrumented system (SIS) assessment
Safety instrumented function (SIF) testing support
Redundant controller configuration
Hot standby PLC system servicing
Distributed I/O system servicing
Remote terminal unit (RTU) servicing
Industrial gateway configuration
Protocol converter servicing
Data concentrator system servicing
Operator workstation maintenance
Engineering workstation maintenance
Control room monitoring display servicing
Mimic panel and system diagram servicing
Automation system interface integration

Automation consultancy, engineering and project services

Marine automation system survey
Marine automation system condition assessment
Vessel automation audit
Automation system obsolescence assessment
Automation upgrade feasibility study
Marine automation project engineering
Control system design and engineering
Automation system architecture design
PLC and HMI design engineering
Instrumentation design engineering
Control panel design engineering
Automation system integration engineering
Automation system specification preparation
Automation equipment technical evaluation
Automation equipment procurement support
Automation spare parts identification
Automation spare parts supply coordination
Control system replacement planning
Automation retrofit project management
Automation commissioning project management
Marine automation troubleshooting consultancy
Automation maintenance planning
Automation reliability improvement consultancy
Automation performance optimisation
Machinery automation risk assessment
Automation technical documentation review
Automation drawings and wiring diagram preparation
Control system software documentation
Automation crew training
Automation technical support contracts

Automation service contracts and ongoing support

Marine automation annual maintenance contracts
Marine automation preventive maintenance contracts
Vessel-wide automation maintenance contracts
Engine automation maintenance contracts
Generator automation maintenance contracts
Power management maintenance contracts
Propulsion automation maintenance contracts
Thruster automation maintenance contracts
Boiler automation maintenance contracts
Integrated automation technical support contracts

See our Indian port coverage or email service@seanav.org with the vessel, port and equipment details.

Marine Automation Systems Commercial Services (9 Scopes)

Select any statutory service below to view technical specifications, standard 5-step SOP workflows, approved equipment models, and port attendance lead times:

MARPOL Annex I MEPC.107(49) All IACS & Non-IACS Classes

15 PPM Bilge Alarm Monitor Calibration & Oily Water Separator (OWS) Certification India

Seanav Marine provides 24/7 calibration, optical sensor cell renewal, and statutory certification for 15 ppm bilge alarm monitors and Oily Water Separators (OWS) across all Indian ports. Our...

15 PPM Bilge Alarm & OWS Calibration View Scope →

UMS Notation Restoration SOLAS II-1/31 Compliant

Engine Alarm Monitoring System (AMS / ERAMS) & Sensor Overhaul India

Seanav Marine delivers certified onboard troubleshooting, sensor calibration, and module overhaul for marine Alarm Monitoring Systems (AMS/ERAMS) across all Indian ports. Our instrumentation engineers attend Kongsberg, Lyngso Marine,...

Engine Alarm Monitoring System (AMS) View Scope →

IACS UR M35/M36 Certified Bridge Maneuvering Expert

Main Engine Remote Control Maneuvering & Governor System Service India

Seanav Marine provides 24/7 technical attendance for marine Main Engine Remote Control, electronic maneuvering systems, and governor actuators across all Indian ports. We service Nabtesco (M-800), Kongsberg AutoChief...

Main Engine Remote Control & Maneuvering View Scope →

Flame Safeguard Certified SOLAS II-1/32 Compliant

Marine Boiler Automation, Burner Management & Flame Safeguard Service

Seanav Marine provides certified automation, combustion control, and burner management system servicing for auxiliary, composite, and exhaust gas boilers across all Indian ports. Our instrumentation engineers troubleshoot optical...

Marine Boiler Automation & Safety View Scope →

Blackout Prevention Auto-Synchronization Expert

Marine Power Management System (PMS) & Generator Synchronization Service

Seanav Marine provides certified Power Management System (PMS) inspection, troubleshooting, and generator automatic synchronizing system servicing across all Indian ports. We attend DEIF (PPM-3, AGC), Woodward (Easygen), Schneider,...

Power Management System (PMS) View Scope →

Crankcase Safety Mandatory IACS UR M10 Compliant

Crankcase Oil Mist Detector (OMD) Calibration & Overhaul India

Seanav Marine provides statutory 24/7 calibration, optical sensor overhaul, and spare parts supply for marine Crankcase Oil Mist Detectors (OMD) across Indian ports. We service Schaller Automation (Visatron...

Oil Mist Detector (OMD) Calibration View Scope →

Cargo & Ballast Reliability Electro-Hydraulic VRC Experts

Valve Remote Control (VRC) & Tank Level Gauging Automation Service

Seanav Marine delivers comprehensive overhaul and repair for electro-hydraulic Valve Remote Control Systems (VRC/VPCS), hydraulic power units (HPUs), and radar/electro-pneumatic tank gauging systems at all Indian ports. We...

Valve Remote Control (VRC) & Ballast Automation View Scope →

Marine Class PLC Certified Siemens / Omron / Schneider Experts

Marine PLC Programming, HMI Touchscreen Repair & SCADA Integration India

Seanav Marine offers certified marine PLC programming, HMI touch panel replacement, and SCADA automation repair across Indian ports. Our flying squads troubleshoot Siemens S7, Omron, Schneider, and Mitsubishi...

Marine PLC Programming & HMI Touchscreens View Scope →

MARPOL Annex I Reg 31 Certified IMO MEPC.108(49) & 240(65)

Oil Discharge Monitoring Equipment (ODME) Annual Calibration & 5-Year Survey India

Seanav Marine delivers 24/7 certified Oil Discharge Monitoring Equipment (ODME) annual calibration, 5-year overhaul surveys, and statutory MARPOL Annex I compliance certification across all Indian ports (JNPT, Mumbai,...

ODME Calibration & 5-Year Survey View Scope →

24/7 Port & Anchorage Attendance Across India

Our engineers board vessels at berth or offshore anchorages across all major maritime hubs in India:

Jawaharlal Nehru Port (INNSA) Berth attendance in 2 hours; Mumbai Floating Light (BFL) outer anchorage attendance via Belapur launch pier.

Deendayal Port Kandla (INIXY) Full cargo terminal & Kandla Roads outer anchorage coverage; fast spares transit from Gandhidham warehouse.

Adani Mundra Port (INMUN) Private port fast-track gate clearance; Mundra Roads anchorage rendezvous and SPM tanker support.

Cochin Port / ICTT (INCOK) Willingdon Island depot; OPL East-West international shipping route rendezvous launch service.

Need Urgent Attendance or Class Survey?

Contact our 24/7 technical coordination desk for immediate boarding clearance, spare parts dispatch, or statutory surveyor coordination across India.

Book 24/7 Attendance Now Email Technical Desk

Marine Automation & Control Engineering Services in India