
Statutory inspection guide to shipboard fireman’s outfits under SOLAS II-2 Regulation 10.2.3 and the IMO FSS Code Chapter 3. Fire-resistant aluminized/Nomex suits, electric safety lamps (ATEX/IECEx approved), non-conductive insulated fire axes, and gastight chemical protective suits.
Commercial shipboard operations rely on precision synchronization between safety appliances, navigation electronics,
and machinery space automation. In strict accordance with SOLAS Chapters II-1, II-2, IV, and V,
the IMO Fire Safety Systems (FSS) Code, and Classification Society UMS mandates (DNV, Lloyd’s Register, ABS, IRS),
marine systems require rigorous periodic functional testing, statutory calibration, and OEM-spec overhauls.
Seanav Technical Engineering Board delivers comprehensive class-approved servicing across all major UAE ports,
ensuring uncompromised reliability, complete redundancy, and zero Port State Control (PSC) deficiencies.
Statutory Scope & System Coverage
This technical operational guide synthesizes engineering procedures, statutory benchmarks, and routine maintenance protocols for:
Fireman’s Outfit:Fireman’s SuitSafety LampFire BlanketFireman's Axe SupplyFire Blanket SupplyFire Blanket InspectionFire Blanket Replacement
1. SOLAS Chapter II-2 Regulation 10 & IMO FSS Code Chapter 3
Under SOLAS Chapter II-2 Regulation 10.2.3 and the IMO Fire Safety Systems (FSS) Code Chapter 3, every commercial vessel must carry at least two complete sets of certified Fireman’s Outfits stored in widely separated, clearly marked locations ready for immediate emergency donning. Tankers and vessels carrying dangerous liquid chemicals or gases must carry additional sets, including certified gastight chemical protective suits per the IBC/IGC Codes.
2. Mandatory Fireman’s Outfit Component Standards
Each individual fireman’s outfit comprises specialized personal protective equipment engineered to resist extreme conductive, convective, and radiant heat:
- Protective Clothing: Multi-layer fire-resistant suit (Nomex / Kevlar / PBI matrix) with waterproof and breathable moisture barriers, compliant with EN 469 / ISO 11613.
- Firefighter Boots & Gloves: Heavy-duty vulcanized rubber or fire-resistant leather boots with steel toe caps and puncture-resistant soles (EN 15090); dielectric insulation compliant with EN 659 heat gloves.
- Rigid Helmet & Neck Curtain: Impact-resistant helmet with internal suspension, polycarbonate gold-coated heat visor, and aluminized neck protector per EN 443.
- Electric Safety Lamp (Torch): Explosion-proof portable flashlight certified for hazardous environments (ATEX / IECEx Zone 0/1, Ex ia IIC T4), delivering continuous illumination for not less than 3 hours.
- Fireman’s Axe: Heavy-duty forged steel axe with a non-conductive, high-voltage insulated fiberglass handle tested to 1,000 Volts.
- Fireproof Lifeline: Minimum 30-meter high-tensile steel wire core line with vegetable or synthetic fiber covering, tested to withstand a static proof load of not less than 3.5 kN, secured by a snap-hook.
3. Gastight Chemical Protective Suits (IBC/IGC Code)
For chemical and gas tankers, EN 943-2 Type 1a-ET (Emergency Teams) fully encapsulating gastight suits are mandatory. These suits accommodate the SCBA set entirely inside the gastight skin, isolating the firefighter from toxic vapor clouds, acid splashes, and cryogenic liquid exposure. Annual statutory maintenance involves precision pressure decay leak testing per ISO 17491-1.
Statutory & Operating Specification Matrix
| Component | Statutory / International Standard | Operational Specification |
|---|---|---|
| Firefighter Suit | EN 469:2020 Level 2 / ISO 11613 | Flame retardant, radiant heat barrier, water-repellent |
| Safety Lamp (Torch) | FSS Code Ch. 3 / ATEX Zone 0/1 | Min 3 hours burn time; intrinsically safe (Ex ia) |
| Insulated Fireman’s Axe | FSS Code Ch. 3 / Dielectric rated | High-voltage handle insulation tested to 1,000V |
| Fireproof Lifeline | FSS Code Ch. 3 Section 2.1.3 | Min 30m length; steel wire core; 3.5 kN static proof test |
| Gastight Chemical Suit | EN 943-2:2019 Type 1a-ET (IBC/IGC) | Pressure decay test: Δp ≤ 300 Pa over 6 minutes |
Diagnostic & Failure Resolution Protocols
| Audit Discrepancy | PSC / Safety Consequence | Remedial Protocol |
|---|---|---|
| Non-Intrinsically Safe Torch in Locker | Catastrophic explosion risk in gas/fuel vapors; immediate PSC Code 17/30 | Replace with certified ATEX Zone 0/1 LED explosion-proof marine safety flashlight. |
| Chemical Gastight Suit Pressure Test Failure | Toxic gas infiltration through zipper teeth or exhaust valve diaphragm | Lubricate heavy-duty gastight zipper with paraffin wax; renew rubber exhalation valve discs and re-test. |
| Fireproof Lifeline Corrosion / Damaged Sheath | Lifeline snap risk during firefighter extraction | Condemn line; supply class-certified 30m steel-cored lifeline with heavy-duty snap-shackle. |
Need Certified Marine Engineering Attendance?
Seanav deploys factory-trained service engineers 24/7 across Kandla, Mundra, Mumbai, JNPT, Cochin, Chennai, Vizag, and Kolkata.
Explore our core capability portfolio under Marine Safety & Fire-Fighting Appliances (LSA / FFA).