Seanav Marine
Maritime Engineering Journal Class Compliance Review

Marine Echo Sounder & Doppler Speed Log Annual Survey, Transducer Overhaul & Calibration

⏱️ 5 min read
Marine Echo Sounder and Doppler Speed Log Annual Survey
Marine Echo Sounder and Doppler Speed Log Annual Survey

Under SOLAS Chapter V (Regulation 19.2.3 and Regulation 19.2.7), all vessels of 300 GT and upwards must be fitted with an approved Echo Sounding Device and a Speed and Distance Measuring Equipment (SDME / Speed Log). Reliable measurement of under-keel water depth and Speed Through Water (STW) is critical to shallow water navigation, port pilotage, and ARPA radar collision avoidance vector calculations.

1. Regulatory Standards: IMO Performance Mandates (MSC.74 & MSC.96)

Modern echo sounders must comply with IMO Resolution MSC.74(69) Annex 4, providing clear graphical recording of depth across shallow (0 to 20 m) and deep (up to 200 m) ranges. Doppler speed logs must comply with IMO Resolution MSC.96(72), measuring forward/aft speed through water within 2% or 0.2 knots. Seanav provides certified Echo Sounder Supply, Speed Log Supply, Echo Sounder Installation, and annual Class survey verification across Furuno (FE-800 / DS-80), JRC (JFE-680 / JLN-652), Skipper, and Consilium suites.

2. Echo Sounder Annual Survey: Pulse Width, Acoustic Transducers & Gain

Our marine technicians verify electro-acoustic performance using calibrated underwater acoustic simulators and RF signal generators:

Echo Sounder Testing Sequence:

  • Transmitter Pulse Transmission: Checking piezo-ceramic transducer drive voltage (typically 50 kHz or 200 kHz) across short, medium, and long pulse widths.
  • Receiver Sensitivity & Noise Rejection: Injecting simulated acoustic echo signals to calibrate TVG (Time Varied Gain) curve and draft offset adjustments.
  • Shallow Water Audible Alarm: Testing bridge audible and visual alarms when simulated water depth drops below user-preset safety limits.
  • Depth Display Memory Audit: Verifying non-volatile storage retains at least 12 hours of sounding history tagged with UTC timestamp, position, and course.

3. Speed Log Diagnostics: Dual-Axis Doppler vs. Electromagnetic (EM) Logs

Maintaining accurate speed inputs to radar/ARPA is legally required for valid collision avoidance vectors:

  • Dual-Axis Doppler Speed Logs: Measuring Doppler frequency shifts along 4 acoustic acoustic beams (Janus configuration) to determine forward/aft and transverse speed through water and over ground.
  • Electromagnetic (EM) Speed Logs: Measuring Faraday voltage generated across hull sensor electrodes as conductive seawater flows through the magnetic field; cleaning electrode faces and testing preamplifier null voltage.
  • Pulse Output & Serial Interfacing: Verifying 200 pulses/nautical mile relay contacts and IEC 61162 VBW sentence transmission to VDR, ECDIS, and ARPA radar.

4. Underwater Transducer Overhaul, Sea-Chest Valves & Hull Penetrations

Transducers housed inside bottom sea chests endure severe marine fouling, barnacle growth, and mechanical wear:

Mechanical Component Operational Requirement Seanav Service Scope
Sea-Chest Gate Valve Watertight isolation during sensor retraction Overhauling bronze gate valves, repacking gland packing, and hydrostatic leak testing.
Sensor Retraction Mechanism Smooth mechanical withdrawal without water ingress Greasing hoisting spindles, replacing O-ring seals, and testing safety limit switches.
Acoustic Transducer Face Zero marine growth or acoustic window erosion Dry-dock cleaning, applying specialized acoustic-transparent antifouling, and Megger insulation testing (> 50 MOhm).

5. Depth History Data Logging, Shallow Water Alarms & VDR Recording

Our engineers test downstream data broadcast to ensure that sounding and speed data are recorded without error inside the Voyage Data Recorder (VDR) per SOLAS Chapter V Regulation 20.

6. Port Attendance & Dry-Dock Servicing Across India

Seanav provides underwater diver sensor cleaning, gate valve overhauls, and complete drydock installation of speed logs and echo sounders across all major Indian shipyards and ports, including Mumbai, JNPT, Cochin, Goa, Kandla, Chennai, and Visakhapatnam.

Schedule Echo Sounder or Speed Log Annual Survey

Read about our acoustic and navigational log engineering on our Echo Sounder & Speed Log Commercial Hub or dispatch a service engineer at any Indian Commercial Port.

Reviewed by Verified Maritime Technical Authority

Seanav Technical Engineering Board

Lead Marine Electronics Technical Superintendent

Senior technical marine electronics engineering board coordinating statutory SOLAS Chapter IV/V radio surveys, gyro compass overhauls, VDR APT certifications, and 24/7 technical riding squads across 170+ Indian commercial ports.

🛡️ SOLAS Marine Navigation & Communication Maintenance
🛡️ MCA Approved Magnetic Compass Adjustment Network
🛡️ GMDSS General Operator Certificate (GOC) Standards
🛡️ Surveys for All IACS & Non-IACS Classes via Channel Partners

🚨 24/7 Port & Anchorage Technical Dispatch

Calling at an Indian Port? Need Immediate Attendance or Spares?

Our factory-trained marine electronics and automation engineers board vessels calling at Indian major gateways within 2–4 hours (subject to berth clearance, harbor launch availability, and port security passes) with OEM spares:
JNPT (Nhava Sheva),
Mumbai,
Kandla,
Mundra,
Cochin,
Chennai,
Vizag, and
Paradip.
Statutory Class surveys coordinated for all IACS & Non-IACS classes through accredited channel partners across India.

📞 Call Duty Engineer: +91 75492 76285
⚡ Request Attendance Quotation →