Seanav Marine
Maritime Engineering Journal Class Compliance Review

Commercial Fishing Sonars & Hydro-Acoustic Catch Monitoring Systems: CHIRP & Omni-Scanning

⏱️ 5 min read

1. Hydro-Acoustic Fisheries Physics: Target Strength (TS), Swim Bladder Resonance & Biomass

Modern industrial fishing trawlers, purse seiners, and longliners operate at massive commercial scales where operational profitability hinges upon locating fish schools and estimating biomass density before deploying fishing gear. The Commercial fish finder echo sounder relies upon underwater hydro-acoustic physics:

When an acoustic pressure wave travels through seawater and encounters a fish, acoustic reflection is caused by the acoustic impedance mismatch between seawater and the fish’s anatomy. Crucially, up to 90% to 95% of reflected acoustic backscatter originates not from the flesh or bones, but from the gas-filled swim bladder. Acoustic engineers quantify this via Target Strength (TS in dB):

TS = 20 × log10(Length in cm) – b20 (Species Constant)

By processing echo return amplitudes across calibrated split-beam transducers, modern scientific sounders (e.g., Simrad EK80, Furuno FCV-1900G) differentiate species size and calculate aggregate biomass in tons per cubic kilometer.

2. Wideband CHIRP Echo Sounders: Pulse Compression & Razor-Sharp Target Separation

Traditional echo sounders transmit single-frequency tone bursts (e.g., 50 kHz or 200 kHz). At 50 kHz, pulse lengths are long (up to 3 ms), resulting in target resolution limits of 1 to 2 meters. Individual fish packed tightly together blur into an indistinguishable acoustic blob.

Modern Broadband CHIRP (Compressed High-Intensity Radiated Pulse) technology revolutionizes fish detection:

  • Frequency Swept Transmissions: Transmits rapid frequency sweeps (e.g., 28 to 60 kHz Low CHIRP, 130 to 210 kHz High CHIRP) emitting up to 100 times more energy into the water column.
  • Digital Pulse Compression (DSP Match Filtering): The receiver correlates returns against the known transmit frequency sweep, compressing pulses into microsecond-duration spikes. Target separation improves from 1.5 meters down to under 2 inches (5 cm), resolving individual fish hugging the ocean floor or schooling inside bait balls.

3. Full-Circle Omni-Directional Scanning Sonar: Multi-Beam Arrays & School Tracking

While vertical echo sounders only view the narrow cone directly underneath the keel, purse seiners and pelagic trawlers require 360-degree horizontal visibility around the vessel. Omni-directional scanning sonars (e.g., Simrad SX90 / SY50, Furuno CSH-8L / FSV-25, Wesmar HD860) utilize cylindrical multi-element transducer arrays lowered through a sea chest:

Sonar Type Operating Acoustic Frequency Maximum Effective Range Target Application
Low-Frequency Omni Sonar 20 kHz to 30 kHz 3,000 to 5,000 meters Long-range tuna, mackerel, and herring detection in deep ocean basins
High-Frequency Omni Sonar 80 kHz to 160 kHz 800 to 1,500 meters Razor-sharp shallow water resolution, tracking skittish schools near reefs or rocky bottoms

The system beams 360-degree horizontal transmission pulses while simultaneously steering hundreds of narrow receiving beams. Software vector tracking calculates school speed and swimming direction, predicting exact net intercept courses.

4. Wireless Trawl Catch Monitoring: Headline Sonar, Door Spread & Catch Volume Sensors

Modern commercial trawlers mount wireless acoustic telemetry sensors directly onto the fishing net thousands of meters astern:

  • Trawl Eye / Headline Sonar: Downward and upward scanning acoustic sensor mounted on the headrope, beaming live echograms of fish entering the net mouth wirelessly to the bridge hull hydrophone.
  • Door Spread & Depth Sensors: Measure exact distance between port and starboard trawl doors (validating net geometry) and true depth beneath surface.
  • Catch Volume Sensors: Strapped along the cod-end. As fish fill the net, mesh tension expands, triggering acoustic pressure switches that alert the skipper when 10, 20, or 30 tons of fish have entered the cod-end, preventing catastrophic net blowouts.

5. Longline Buoy Telemetry: High-Seas Satellite Transponders & Solar-Powered Radio Buoys

Tuna longliners deploy fishing lines spanning up to 50 to 100 kilometers across open ocean. To recover lines, vessels deploy Satellite Tracking Radio Buoys (e.g., Marine Instruments, Zunibal, Satlink):

  • Iridium / Inmarsat Satcom Telemetry: Buoys transmit GPS position, water temperature, battery voltage, and integrated echo sounder biomass estimates directly to the vessel’s bridge software.
  • Solar Recharging: Built-in monocrystalline solar panels maintain battery float charge indefinitely, enabling months of continuous autonomous tracking on high-seas drifting Fish Aggregating Devices (FADs).

6. Seabed Hardness & Roughness Classification: Bottom Discriminator Algorithms

Bottom trawling skippers must identify muddy/sandy bottoms where valuable groundfish congregate while avoiding jagged rocky pinnacles that tear multi-million dollar nets. Advanced echo sounders analyze the tail end of the bottom echo (E1 and E2 algorithms), outputting numerical hardness (mud, sand, gravel, rock) and rendering bottom composition maps on bridge navigation plotters.

Commercial Fishing Acoustics & Sonar Solutions

Seanav Marine supplies, installs, and drydock-retrofits Furuno, Simrad, Wesmar, and Koden commercial fishing echo sounders, omni-sonars, and wireless net monitoring systems across all Indian fishing ports.

7. Technical FAQs: Commercial Fishing Sonar Systems

Q1: Why is CHIRP sonar superior to traditional single-frequency sounders for fishing?

CHIRP sweeps across a broad spectrum of frequencies (e.g., 130 to 210 kHz) rather than firing a single frequency pulse. Digital pulse compression delivers up to 10-50x finer vertical target resolution, cleanly separating individual fish from sea floor clutter and bait balls.

Q2: How do wireless net sensors communicate from the trawl to the ship?

Net sensors transmit high-frequency acoustic telemetry pulses (typically 40 to 70 kHz) through seawater. An acoustic hydrophone mounted on the ship’s hull receives the signals, and the bridge receiver decodes headline height, door spread, and catch fill percentages in real time.

Q3: What causes acoustic interference on commercial fishing sonars?

Acoustic interference is commonly caused by propeller cavitation bubbles washing over hull-mounted transducers, electrical noise from poorly grounded alternating-current winches, or acoustic crosstalk from other vessels operating on identical frequencies.

Reviewed by Verified Maritime Technical Authority

Lead Marine Electronics Engineer & Technical Surveyor

Certified marine electronics engineer with extensive sea-going and Class survey experience covering SOLAS Chapter IV/V compliance, GMDSS radio surveys, VDR APT, and statutory automation calibrations across Indian major ports.

🛡️ 15 PPM Bilge Alarm Monitor Calibration (MEPC.107(49))
🛡️ Engine Alarm Monitoring System (AMS/ERAMS) Specialist
🛡️ Marine Boiler Automation & Burner Management
🛡️ Power Management System (PMS) & Generator Synchronization
🛡️ Crankcase Oil Mist Detector (OMD) Calibration (IACS UR M10)
🛡️ Valve Remote Control (VRC) & Tank Level Gauging
🛡️ Marine PLC & HMI Programming (Siemens, Allen-Bradley, Mitsubishi)
🛡️ Marine GPS / DGPS & GNSS Sensor Interfacing
🛡️ Navigation Echo Sounder & Transducer Acoustic Calibration
🛡️ Marine ECDIS Dual System Interfacing & IHO Presentation Library 4.0
🛡️ Marine Autopilot Heading Control & Steering Gear Synchronization
🛡️ Marine Gyro Repeater & Bridge Wing Pelorus Alignment
🛡️ Inmarsat-C GMDSS Radio Surveyor & Satcom Specialist
🛡️ Marine MF/HF DSC & NBDP Radiotelex Specialist
🛡️ All IACS & Non-IACS Classes via Channel Partners
🛡️ MCA Approved Compass Adjuster
🛡️ GMDSS General Operator Certificate (GOC)
🛡️ Accredited Partner Survey Network

🚨 24/7 Port & Anchorage Technical Dispatch

Calling at an Indian Port? Need Immediate Attendance or Spares?

Our factory-trained marine electronics and automation engineers board vessels calling at Indian major gateways within 2–4 hours (subject to berth clearance, harbor launch availability, and port security passes) with OEM spares:
JNPT (Nhava Sheva),
Mumbai,
Kandla,
Mundra,
Cochin,
Chennai,
Vizag, and
Paradip.
Statutory Class surveys coordinated for all IACS & Non-IACS classes through accredited channel partners across India.

📞 Call Duty Engineer: +91 75492 76285
⚡ Request Attendance Quotation →