Seanav Marine

em-trak B200 High-Power 5W SOTDMA Rugged Class B AIS Transceiver

$1,295.00

Equipment Overview & Key Specifications The em-trak B200 is an ultra-rugged 5W SOTDMA Class B AIS transceiver built specifically for commercial workboats, offshore support vessels, tugs, and high-speed patrol craft operating in extreme marine environments. Enclosed in a heavy-duty, IP67 waterproof and vibration-proof housing, the B200 features satellite tracking capability, high-voltage surge protection, and enterprise reliability. Technical Specifications AIS Class & Technology Heavy-Duty Commercial Class B SOTDMA RF Output Power 5.0 Watt (37 dBm) Environmental Protection IP67 fully waterproof, dustproof, and submersible Vibration & Shock Exceeds IEC 60945 hard-environment commercial marine standards Satellite Telemetry Enhanced satellite detection algorithm for global…

SKU: SNV-EMT-B200
Category:
Brands:

Description

Equipment Overview & Key Specifications

The em-trak B200 is an ultra-rugged 5W SOTDMA Class B AIS transceiver built specifically for commercial workboats, offshore support vessels, tugs, and high-speed patrol craft operating in extreme marine environments. Enclosed in a heavy-duty, IP67 waterproof and vibration-proof housing, the B200 features satellite tracking capability, high-voltage surge protection, and enterprise reliability.

Technical Specifications

AIS Class & Technology Heavy-Duty Commercial Class B SOTDMA
RF Output Power 5.0 Watt (37 dBm)
Environmental Protection IP67 fully waterproof, dustproof, and submersible
Vibration & Shock Exceeds IEC 60945 hard-environment commercial marine standards
Satellite Telemetry Enhanced satellite detection algorithm for global offshore tracking
Bridge Interfaces Dual isolated NMEA 0183, NMEA 2000, USB
Operating Voltage 12V / 24V DC (9.6V to 31.2V DC) with surge protection
Mounting Options Heavy-duty trunnion bracket and flush console mounting

Frequently Asked Questions (AEO / Technical Reference)

What makes the B200 different from the B900 series?

The B200 is built with an industrial-grade cast chassis engineered for heavy continuous commercial vibration, extreme temperature swings, and severe shock on open workboats, tenders, and military RIBs.

Does the B200 support satellite AIS tracking?

Yes, the B200 incorporates advanced message scheduling and preamble shaping optimized for reception by low-earth-orbit (LEO) AIS satellites when operating far offshore.

Is the B200 suitable for open, exposed helm consoles?

Yes, with its complete IP67 hermetic sealing, the B200 operates reliably even when subjected to direct sea spray and high-pressure hose washdowns.

Can the B200 connect to commercial radar and ECDIS displays?

Yes, its optically isolated NMEA 0183 and NMEA 2000 interfaces interface seamlessly with all commercial navigation displays.

Where can I get the em-trak B200 installed in the UAE?

Seanav Marine provides factory-authorized installation, compass safe distance verification, and sea trials at Dubai Maritime City, Jebel Ali, and Abu Dhabi.

Certified Marine Survey & Installation Credentials

  • Authorized Distributor & Service Partner: Genuine em-trak Marine Electronics transceivers, splitters, and tracking systems with official factory warranty.
  • Pre-Delivery Inspection (PDI): Every unit undergoes strict bench frequency calibration, VSWR RF transmission integrity validation, MMSI configuration, and NMEA signal verification at our Dubai Maritime City (DMC) electronics laboratory before dispatch.
  • Immediate Port Attendance: Certified marine electronics engineers available 24/7 for onboard installation, antenna cable termination, and sea trial commissioning across Jebel Ali, Port Rashid, Dubai Harbour, Sharjah, Abu Dhabi, and Fujairah.
  • Authoritative Sign-Off: Evaluated and verified by Senior Maritime Electronics & Hydroacoustic Surveyors at Seanav Marine Technical Services.

Technical Specifications & Operational Standards

Review certified engineering parameters, electrical inputs, data protocols, and Class compliance standards for this unit:

OEM Brand / ManufacturerEm-Trak
Model / Part NumberSNV-EMT-B200
Equipment ClassificationSOLAS Mandatory Class A Marine AIS Transceiver
VHF Transceiver Power12.5 W High Power / 1.0 W Low Power (Automatic Switching)
Frequency Range156.025 MHz to 162.025 MHz (AIS 1 & AIS 2 Channels)
Standard ComplianceIMO MSC.74(69), ITU-R M.1371, IEC 61993-2, IEC 62288 BAM
GPS / BAM InterfacesDedicated Differential GPS Antenna Input + Bridge Alert Management Ports
Stock & Port LogisticsReady Stock for Immediate Vessel Supply across Mumbai, JNPT, Kandla, Cochin, Chennai & Visakhapatnam
In-the-Box DocumentationOEM Certificate of Conformance, Wiring Schematics, Installation & Operating Manual
B2B Marine Procurement & Same-Day Port Dispatch

Seanav Marine maintains bonded warehouse spare parts inventory and factory-trained technical riding squads across all major Indian ports. Immediate dispatch available to vessel agents, ship chandlers, and technical managers at Mumbai, JNPT (Nhava Sheva), Kandla, Mundra, Cochin, Chennai, and Visakhapatnam (view all 400+ ports →).

Reviews

There are no reviews yet.

Be the first to review “em-trak B200 High-Power 5W SOTDMA Rugged Class B AIS Transceiver”

Your email address will not be published. Required fields are marked *